Italian GP: Monza F1 technical developments

Italian GP: Monza F1 technical developments

This shot has a wealth of detail, as not only do we see the angled holes ahead of the rear tyre, the rear suspension and the very narrow bodywork on the RB16, you’ll also note a bulge around the floor strake beside the rear tyre. This houses the equipment and logging medium for the row of kiel probes that are hidden beneath the red box so they don’t get damaged as the car is moved around the pitlane.

The extremely low downforce version of Red Bull’s rear wing is similar to the one used last weekend at Spa but the mainplane angle has been reduced further still, while the upper flaps trailing edge has been cut down and no longer has a Gurney flap.

An overview of the RB16’s novel front-end arrangement, complete with the steering assembly being placed much further back and the use of a very narrow ‘S’-duct outlet.

Mark Sutton / Motorsport Images

Ferrari’s front wing features a very slim upper flap at the inner section to trim the balance of the car in accordance with the level of downforce being used at the rear. Also note, that while most of the field are trying to narrow their noses and use the space that’s left over to create an enlarged cape, Ferrari has not. It retains the thumb-tip style nose, with a short cape and turning vanes in behind.

Rear wing detail on the Ferrari SF1000

Mark Sutton / Motorsport Images” data-reactid=”146″>

Rear wing detail on the Ferrari SF1000 Mark Sutton / Motorsport Images

Mark Sutton / Motorsport Images

The extremely low downforce rear wing that Ferrari installed this weekend features a very shallow angle of attack.

Front wing detail on the Red Bull Racing RB16

Mark Sutton / Motorsport Images” data-reactid=”169″>

Front wing detail on the Red Bull Racing RB16 Mark Sutton / Motorsport Images

Mark Sutton / Motorsport Images

This view of the RB16’s front wing shows how much of the upper flap has been cut back in order to reduce the downforce being generated and balance it against what’s being created by the rear wing. You’ll note that this almost ad-hoc approach has seen the trailing edge pared back to the wing adjuster and results in some of the vinyl lettering on the wing being incorrectly spaced.

Aero bargeboard detail on the Red Bull Racing RB16

Mark Sutton / Motorsport Images” data-reactid=”192″>

Aero bargeboard detail on the Red Bull Racing RB16 Mark Sutton / Motorsport Images

Mark Sutton / Motorsport Images

Top-down overview of the bargeboard region on the RB16 and what you’ll note is how each tier above the reference plane also has slots in the surface that correspond in order to maintain legality.

Kimi Raikkonen, Alfa Romeo Racing C39

Mark Sutton / Motorsport Images” data-reactid=”215″>

Kimi Raikkonen, Alfa Romeo Racing C39 Mark Sutton / Motorsport Images

Mark Sutton / Motorsport Images

Side-on view of the Alfa Romeo C39 and the bargeboard and deflector solutions, the former of which has been modified as of late as the team just look to rekey some of the aerodynamic structures as they pass down the flank of the car.

Flow-viz paint on the car of Kimi Raikkonen, Alfa Romeo Racing C39

Mark Sutton / Motorsport Images” data-reactid=”238″>

Flow-viz paint on the car of Kimi Raikkonen, Alfa Romeo Racing C39 Mark Sutton / Motorsport Images

Mark Sutton / Motorsport Images

At the rear of the car, flo-viz paint is applied to the Monza specification rear wing to make sure it’s performing as anticipated, as while it was briefly tested it at Spa the actual conditions at Monza are a little different.

Antonio Giovinazzi, Alfa Romeo Racing C39

Mark Sutton / Motorsport Images” data-reactid=”261″>

Antonio Giovinazzi, Alfa Romeo Racing C39 Mark Sutton / Motorsport Images

Mark Sutton / Motorsport Images

Looking at the wing from the front the team has a very unique design for the mounting pillars, with the upper surface almost lopped off when compared with the design they usually favour.

Alex Albon, Red Bull Racing RB16

Mark Sutton / Motorsport Images” data-reactid=”284″>

Alex Albon, Red Bull Racing RB16 Mark Sutton / Motorsport Images

Mark Sutton / Motorsport Images

This rearward shot of the RB16 perfectly illustrates just how little angle that the team has on the rear wing this weekend.

Daniel Ricciardo, Renault F1 Team R.S.20

Mark Sutton / Motorsport Images” data-reactid=”307″>

Daniel Ricciardo, Renault F1 Team R.S.20 Mark Sutton / Motorsport Images

Mark Sutton / Motorsport Images

The bargeboard and deflector region on the Renault RS20 with its various hedgehog-like surfaces. Appears the team also had more data gathering equipment on the car, the telltale sign being the wiring on the side of the chassis leading into the cockpit.

Flow-viz paint on the rear of Nicholas Latifi, Williams FW43

Mark Sutton / Motorsport Images” data-reactid=”330″>

Flow-viz paint on the rear of Nicholas Latifi, Williams FW43 Mark Sutton / Motorsport Images

Mark Sutton / Motorsport Images

Williams also painted flo-viz on the rear wing of Nicolas Latifi’s car as they looked to get visual confirmation of how the wing is performing around Monza.

Nicholas Latifi, Williams FW43

Charles Coates / Motorsport Images” data-reactid=”353″>

Nicholas Latifi, Williams FW43 Charles Coates / Motorsport Images

Charles Coates / Motorsport Images

The forward view of Latifi’s car which confirms he was using a lower downforce rear wing when compared with Nissany who subbed in for George Russell in FP1. You’ll also note he only has the one chassis canard on his car too, on the left-hand side (right as you’re looking at it).

Roy Nissany, Williams FW43

Charles Coates / Motorsport Images” data-reactid=”376″>

Roy Nissany, Williams FW43 Charles Coates / Motorsport Images

Charles Coates / Motorsport Images

A rearward shot of Nissany’s car during FP1 featuring the higher downforce spoon-shaped rear wing and complementary T-Wing.

Pierre Gasly, AlphaTauri AT01 spins into the gravel

Charles Coates / Motorsport Images” data-reactid=”399″>

Pierre Gasly, AlphaTauri AT01 spins into the gravel Charles Coates / Motorsport Images

Charles Coates / Motorsport Images

Gasly, having taken a trip through the gravel, presents us with a shot of the flo-viz on his rear wing.

Sergio Perez, Racing Point RP20

Mark Sutton / Motorsport Images” data-reactid=”422″>

Sergio Perez, Racing Point RP20 Mark Sutton / Motorsport Images

Mark Sutton / Motorsport Images

Sergio Perez at the wheel of his Racing Point RP20 tests out the lower downforce rear wing, which has a shallower angle of attack this weekend and no Gurney on the trailing edge.

Lance Stroll, Racing Point RP20

Mark Sutton / Motorsport Images” data-reactid=”445″>

Lance Stroll, Racing Point RP20 Mark Sutton / Motorsport Images

Mark Sutton / Motorsport Images

Lance Stroll completes some laps with a T-Wing mounted on the rear of his RP20, supplementing the lower downforce rear wing.

Lando Norris, McLaren MCL35

Charles Coates / Motorsport Images” data-reactid=”468″>

Lando Norris, McLaren MCL35 Charles Coates / Motorsport Images

Charles Coates / Motorsport Images

A relatively simple low downforce rear wing for McLaren at Monza, as the team prefers not to chase complex rear shapes like some rivals.

McLaren MCL35 camera detail

Mark Sutton / Motorsport Images” data-reactid=”491″>

McLaren MCL35 camera detail Mark Sutton / Motorsport Images

Mark Sutton / Motorsport Images

McLaren briefly ran with some additional components within the front camera pod housing, likely capturing hi-speed footage to monitor flutter (white arrow) with the giveaway of their installation being this cabling shrink wrapped to the chassis (red arrow).

Romain Grosjean, Haas VF-20

Mark Sutton / Motorsport Images” data-reactid=”514″>

Romain Grosjean, Haas VF-20 Mark Sutton / Motorsport Images

Mark Sutton / Motorsport Images

The low downforce rear wing favoured by Haas, with its bow tie style trailing edge to the upper flap, as it sweeps down to meet the slot gap separators. Also note the amount of front wing angle taken out by the difference between the wing angle of the outer and inner sections displayed near the adjuster.

Carlos Sainz Jr., McLaren MCL35

Andy Hone / Motorsport Images” data-reactid=”537″>

Carlos Sainz Jr., McLaren MCL35 Andy Hone / Motorsport Images

Andy Hone / Motorsport Images

The McLaren MCL35 with flo-viz on the rear wing as the team looks for visual confirmation that the wing is performing as anticipated.

Read Also:

Italian GP: Latest key F1 technical developmentsMercedes “will gain a lot of race time” with engine modes ban” data-reactid=”544″>Italian GP: Latest key F1 technical developmentsMercedes “will gain a lot of race time” with engine modes ban

Source Article